380V High Speed Stainless Steel Wire Drawing Machine With Electrical Control Cabinet

Ø4mm - 0.5mm 380V Stainless Steel Wire Drawing Machine with Low carbon steel

Equipment Composition

1 LZ6/500 Straight line wire drawing machine

2 800mmI-spool wire take-up machine

3 Man-machine interface control touch screen

4 Whole set electrical control cabinet

Function:

This High/Low carbon steel/stainless wire drawing machineis used to draw iron, copper, aluminium wires, mainly for mesh weaving, construction, galvanization, or supply for the wire drawin of water tank.

This High/Low carbon steel/stainless wire drawing machine includes 2 drum-uint,3 drum-uint, 4drum-unit, 5drum-unit.

tire wire drawing machines can be ordered according to the need of our customers.

Main technical parameter and points:

(1) Inlet strength: ≦650 MPa

(2) Max inlet dia: Ф6.5mm

(3) Min wire outlet dia: Ф0.5mm

(4) Max compression rate:92%

(5) Max drawing speed:12m/s Normal drawing speed:10m/s

(6) Water consumption and pressure:5m3/h water pressure≥0.25MPa

(7) Air consumption and pressure:1.0m3/h air pressure≥0.6MPa

(8) Motor:①Main motor:22KW*10 AC motor

② Wire take-up machine:15KW AC motor

(9) Drawing drum: Drum diameter Ф560mm,material:ZG45 steel,spray

tungsten carbide hard alloy powder on the working surface, thickness 1mm,height:60mm , Drum as a direct contact with the steel wire core components, its manufacturing technology also be especially fastidious. My company reel overall beautiful sex and rigidity is higher; After tempering treatment after rough machining,

in order to improve the overall and mechanical properties of the drum; Drum face by surfacing welding wear-resisting carbide processing, and then after grinding machinegrinding refined but become, within the drum surface processing has spiral u-shapeslot. Its cooling principle is through the drum and the relative rotary motion of the water jacket cooling water jacket of the lateral oblique rib to squeeze into the top, the inside of the drum helical will finish heat exchange cooling water down the u- shaped groove to make it fast, within the drum surface processing with the application of the spiral u-shaped slot technology, not only make the squeezing effect of cooling water, and increased the reel internal heat exchange area, practiceproves that the application of this structure, drum heat exchange efficiency more than 30%, thus greatly improve the drum water cooling effect; Another drum wall caneffectively prevent the scale deposit on the inner wall of the drum, further to ensure the water cooling effect, and improve the service life of the drum.to ensure the quality of steel wire drawing. Drum surface finish Ra0.4 or higher, the surface hardness of about HRC60°, drum set satisfies the requirement of high-speed drawing wire line height. Wear and tear up the slot free replacement within 5000h

Equipment features:

this High/Low carbon steel/stainless wire drawing machine can draw low, medium and high rate carbon steel wires, stainless steel wires, prestressed wire, alloy steel wires and so on, which are suitable for making cord yarn steel wire, rubber hose steel wire, spring steel wire, temper steel head wire, gas-protection welding wire, and stainless steel wire.

energy saving, low noise, simple structure, the main electrical components imported, high-speed, high efficiency.

Electrical:

① The basic function in wire drawing machine is complete; Single machine is punctual, leftist writers point move, single point, leftist writers (right) running, stop; Tuning roller tension adjustment, mould box and roll cooling water regulation.

② the work station complete: total rev, stop, stop, acceleration, deceleration, fault indicator, the meter reset

③Touch screen to finish: mold fitting (wire), speed setting, the length of the set (fixed-length automatic parking), jump die set, inching speed setting, fault, according to the actual running speed display, lighting switch